LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Starter, Power Supply - 911 Turbo (996) >> Removing and installing starter (manual transmission) >> Removing the starter

Removing the starter

  1. Disconnect the battery and cover terminal or battery.
  2. Pull back protective cap on the solenoid switch and undo terminal 30 lead (M8 nut) and terminal 50 (M6 nut).
  3. Undo the upper fastening screw. To do this, use the 3/8 inch tool. Tools:
    • Hexagon socket wrench insert a/f 15
    • Universal joint
    • Two short extensions
    • Cross handle or ratchet
  4. Undo the lower fastening screw.
  5. Remove the starter from the holder and turn so that the solenoid switch is facing in the direction of the halfshaft.
  6. Remove starter in a downward direction.
scientia non olet · About LEMON Manuals