LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Starter, Power Supply - 911 Turbo (996) >> Removing and installing starter (manual transmission) >> Installing the starter

Installing the starter

  1. Install and fasten starter. Fasten B+ lead from the battery and B+ lead from the engine to the B+ disconnection point to terminal 30 (M8 nut) on the solenoid switch.
  2. Fasten terminal 50 lead (M6 nut) to the solenoid switch.

    Tightening torque for M8 hexagon nut: 15 Nm (11 ftlb.), M6 screw: 6.5 Nm (5 ftlb.) 

    Tightening torque of the hexagon-head bolt M10: 46 Nm (34 ftlb.) 

  3. Push protective cap over the solenoid switch and engage in the B+ lead.
  4. Connect the battery and perform a function test.
scientia non olet · About LEMON Manuals