LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical - 911 Turbo (996) >> Removing and installing the front PCCB brake disc >> Installation >> Note on bedding in the new brake pads

Note on bedding in the new brake pads

New brake pads require a slightly longer bedding-in period for PCCB brake discs than cast iron brake discs.

In general, the following applies: New brake pads must be worn in (bedding-in period), their optimum braking effect is therefore not reached until after a few hundred kilometers. The slightly reduced braking effect must be compensated for by increased pressure on the brake pedal. The same also applies after a brake disc change.