Gap dimensions, body rear
Courtesy of PORSCHE OF NORTH AMERICA, INC. BODY REAR GAP DIMENSIONS SPECIFICATIONS
| Designation |
Dimension |
Note |
| Side member cover to outer side section |
-A- |
1.4 + 0.5 mm |
|
| -B- |
2 mm |
|
| Rear trim to outer side section |
-C- |
3 +/- 0.5 mm |
Gap is evident |
| Tail light to outer side section |
-D- |
3 +/- 0.5 mm |
|
| -E- |
2 - 1 mm |
Tail light only lowered |
| Rear trim to tail light |
-F- |
5 +/- 2 mm |
|
| -G- |
2-2
mm |
Tail light only lowered |
| Rear lid to rear trim |
-H- |
5 +/- 2 mm |
|
| -J- |
2.2-1.5
mm |
Rear lid only lowered |
| -K- |
5 +/- 2 mm |
|
| -L- |
1.8-1.5
mm |
Rear lid only lowered |
| Rear lid to tail light |
-M- |
4.5 +/- 1 mm |
Tail light only lowered (max. 1 mm) |
| Rear lid to outer side section |
-N- |
4.5 +/- 1 mm |
Rear lid only lowered (max. 1 mm), determine left to right |
| Rear centre panel to outer side section |
-O- |
4.5 +/- 1 mm |
|
| Rear centre panel to rear lid |
-P- |
6-2
mm |
Rear lid only lowered (max. 1 mm) |
| Rear window to outer roof panel |
-Q- |
7.3-2
mm |
|
| Rear window to rear centre panel |
-R- |
8.5-2
mm |
|
| -S- |
8.9 mm |
Dimension is evident |
| Rear window to outer side section |
-T- |
7 mm |
|
| -U- |
6 mm |
Determine left to right |