LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> General Information, Body - 911 Turbo (996) >> Body parts of high-strength steel >> Welding work

Welding work

NOTE:
  • The use of the oxyacetylene welding process is not permissible for body parts made of high-strength steel!
  • Test welding must be carried out in the case of resistance spotwelding (RP) of different panel strengths!

The body parts made from high-strength steel can be welded using the RP resistance spot-welding or MIG welding processes that are customary in workshops.

scientia non olet · About LEMON Manuals