LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats - 911 Turbo (996) >> Removing and installing bucket seat - GT2, as of MY 2001 >> Installing bucket seat GT2 >> Notes

Installing bucket seat GT2: Notes

Fig 1: Installing Bucket Seat - GT2, As Of MY 2001
G03094671Courtesy of PORSCHE OF NORTH AMERICA, INC.
INSTALLING BUCKET SEAT - GT2

No. Procedure Instructions
1 Fitting seat screws at rear Position seat rails on the seat baseframe, screw the rear M10 x 28 Torx screws -3-65 Nm- 
2 Fitting seat screws at front Move seat to rear limit position and screw the front M10 x 28 Torx screws -3-65 Nm- 
3 Fit seat rail cover -2-  Push seat rail cover -2- 
4 Fit six-point seat belt  
scientia non olet · About LEMON Manuals