LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Rear Wheel Suspension, Axle Shaft - 911 CARRERA (996)) >> Removing and installing drive shaft (manual transmission) >> Removing and installing left drive shaft (manual transmission) >> Installing left drive shaft

Installing left drive shaft

WARNING: This page is about a different variant/trim than selected.
  1. Install in reverse order. Grease the toothing of the drive shaft with Optimoly HT.
  2. Carry out a visual inspection of all parts. Replace self-locking nuts. Use correct tightening torques.
    NOTE: Only optimized axle nuts for drive shaft fastening are available from the Parts Service. Pictures and text can be found under the installation instructions for the right drive shaft.
scientia non olet · About LEMON Manuals