LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 GT2 >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust Gas Turbocharging - 911 Turbo (996) >> Removing and installing pressure sensor >> Installation

Removing and installing pressure sensor: Installation

  1. Fasten pressure sensor with a new hexagon-head bolt (M6 x 16) and tighten to 10 Nm (7.5 ftlb).
  2. Fit plug. The plug should engage audibly.
scientia non olet · About LEMON Manuals