Removing and installing pin housing for seat heating and belt buckle

Fig 1: Identifying Seat Heating Pin Housing & Belt Buckle Pin Housing

Courtesy of PORSCHE OF NORTH AMERICA, INC.

See REMOVING FRONT SEAT

1. Cut tie wrap on rear side of central plug with side cutters.
2. Push fuse -2-  away from flat connector in -direction of arrow 2-  . Refer to Fig 1 .
3. Pin housing: Push out the belt buckle -D-  and seat heating -C-  in -direction of arrow 1-  . Refer to Fig 1 .

1. First insert the seat heating pin housing -C-  , then the belt buckle -D-  into the flat connector. Refer to Fig 1 .
2. Push fuse -2-  onto the flat connector. Refer to Fig 1 .
3. Observe the line route and secure with tie wraps on the rear side of the flat connector.