Gap dimensions, body rear - Carrera 4S
Courtesy of PORSCHE OF NORTH AMERICA, INC. BODY REAR GAP DIMENSIONS SPECIFICATIONS - CARRERA 4S
| Designation |
Dimension |
Note |
| Rear trim to outer side section |
-A- |
3 +/- 0.5 mm |
Gap is evident |
| Tail light to outer side section |
-B- |
3 +/- 0.5 mm |
|
| -C- |
2-1
mm |
Tail light only lowered |
| Tail light to middle side section |
-D- |
3 +/- 0.5 mm |
|
| -E- |
2 +/- 1 mm |
Tail light only lowered |
| Rear trim to tail light |
-F- |
5-1
mm |
|
| -M- |
2-2 |
Tail light only lowered |
| Rear lid to side part |
-G- |
4.5 +/- 1 mm |
Determine gap left to right |
| Rear lid to rear spoiler |
-H |
5 +/- 2 mm |
Rear lid only lowered |
| Rear lid to spoiler top section |
-I- |
4.5 +/- 1 mm |
Rear lid only lowered (max. 1 mm) |
| Rear centre panel to spoiler top section |
-J- |
6 +/- 1 mm |
Rear lid only lowered (max. 1 mm) |
| Rear lid to spoiler top section |
-K- |
4.5 +/- 1 mm |
Rear lid only lowered (max. 1 mm), determine seam |
| Rear window to outer roof panel |
-L- |
7.3-2
mm |
|
| Rear window to outer side section |
-N- |
6 mm |
|
| -O- |
7 mm |
Determine left to right |
| Outer side part to rear centre part |
-P- |
4.3 +/- 1 mm |
|
| -Q- |
1.2 mm |
Adhesive seam |
| Rear centre part to rear lid |
-R- |
5.2 +/- 1 |
Only lowered |