Possible causes, elimination, Notes
- Disconnect plug connection X 11 (driver's side).
- Check the lead from X 11 pin A3 (pin side) to the alarm control module plug I, pin 5, for continuity.
- Check the leads from X 11 pin A3 and pin 26 (sleeve side) for continuity.NOTE: There is another plug connection in the door on the door lock module.
- Disconnect the plug connection X 12 (passenger's side).
- Check the lead from X 12 pin A3 (pin side) to the alarm control module plug I, pin 28, for continuity.
- Check the leads from X 12 pin A3 and pin 26 (sleeve side) for continuity.