Installing oil container for exhaust turbocharger

Place the lower union nut of the oil line -lower arrow- in position on the oil container.

Fig 1: Installing Union Nut Of Oil Line On Oil Container
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Fasten the oil container using the two hexagon socket head bolts (a/f 6) -arrows-.

Fig 2: Installing Oil Container Hexagon Socket Head Bolts
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Tightening torque: 23 Nm (17 ftlb.)
Place the upper oil line in position and tighten both union nuts.

Fig 3: Tightening Union Nuts Of Oil Line On Oil Container
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Tightening torque 30 Nm (22 ftlb.)
Tighten the M6 screw -arrow- of the line holder.

Fig 4: Tightening M6 Screw Of Line Holder
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Tightening torque 10 Nm (7.5 ftlb.)
Fit the heat shield using the M6 screw -arrow-.

Fig 5: Installing Heat Shield M6 Screw
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Tightening torque 10 Nm (7.5 ftlb.)
Insert the drain plug -arrow- and the sealing ring.

Fig 6: Inserting Drain Plug
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Tightening torque 30 Nm (22 ftlb.)
Installing heat shield Refer to REMOVING AND INSTALLING REAR BUMPER .

Fig 7: Installing Heat Shield
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Check oil level and top up if necessary. Refer to CHANGING THE ENGINE OIL AND OIL FILTER .