Interference noises due to all loudspeakers
NOTE:
- The loudspeaker leads are twisted together as standard.
TROUBLESHOOTING - INTERFERENCE NOISES DUE TO ALL LOUDSPEAKERS
| Work instruction | Yes | No | |
|---|---|---|---|
| 1 | Check all connections to the amplifier or the radio. Take particular note of loose or bent pins, corrosion or other damage. Damage present? |
Repair the lead connection. Noise still present? Step 2. Noise remedied? End |
Step 2 |
| 2 |
Noise still present |
Disconnect all amplifiers but one from the power supply Step 3 |
End |
| 3 |
Noise still present? |
Step 4 | Replace amplifier End |
| 4 | Disconnect the audio inputs from the amplifier, whereby the connections for terminals 30, 15 and ground must be maintained. Noise still present? |
Step 5 | Repair the audio connecting cable, lay it again or replace End |
| 5 | If the amplifier is switched on via a relay, remove the relay and connect the amplifier directly to the power supply Noise still present? |
End |
Replace the closing relay of the amplifier End |