LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Radio, Navigation, Telephone, Pcm & Park Assistant - Diagnosis >> Introduction - external Harman amplifier >> General information on the fault memory >> Vehicle hand-over

Vehicle hand-over

The PCM2/CDR23 is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over bar), the PCM2 must be activated with the Porsche System Tester II 9588

  1. Connect and start the Porsche System Tester II 9588 and switch on the ignition
  2. Select Special functions in the Vehicle type menu and confirm with the ">>" key
  3. Select Vehicle hand-over in the Control modules menu and confirm with the ">>" key
  4. Follow the instructions of the Porsche System Tester II 9588.
scientia non olet · About LEMON Manuals