LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Radio, Navigation, Telephone, Pcm & Park Assistant - Diagnosis >> CDR23 - Introduction >> General information on the fault memory >> Vehicle hand-over

Vehicle hand-over

NOTE: The CDR23 is converted into production mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, amplifier, roll-over bar), the CDR23 must be activated with the Porsche System Tester II 9588.
  1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  2. Select Special functions in the Vehicle type menu and confirm with the ">>" key.
  3. Select the menu item Vehicle hand-over and confirm with the ">>" key.
  4. Follow the instructions of the Porsche System Tester II 9588.
scientia non olet · About LEMON Manuals