9605 Telephone/telematics: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING - 9605 TELEPHONE/TELEMATICS
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out telephone fault memory |
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select vehicle type Boxster 986 and start the automatic control module search
- In the Control units menu, select PCM2
- Using the selection button, click Telephone in the Function selection menu and start it with the ">>" key
- Using the selection button, click Fault memory in the Telephone function selection menu and start it with the ">>" key
- Read out fault memory
- Erase fault memory
- Remove ignition key and switch on ignition again
- Read out fault memory
|
-> End |
Fault code is displayed
Step 2 |
| 2 |
Replace telephone control module |
-> End |