800A CD changer: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING - 800A CD CHANGER
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out CD changer fault memory |
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
- Select PCM in the Control units menu and confirm with the ">>" key
- Select CD changer in the Boxster (986) PCM2 function selection and confirm with the ">>" key
- Select Fault memory in the Boxster (986) CD changer function selection and confirm with the ">>" key
- Read out fault memory
- Erase fault memory
- Remove ignition key and switch on ignition again
- Read out fault memory
|
-> End |
Fault code is displayed
Step 2 |
| 2 |
Replace PCM2/CDR23 |
-> End |