Diagnosis/troubleshooting on the external amplifier
DIAGNOSIS/TROUBLESHOOTING - 8002 EXTERNAL BOSE AMPLIFIER
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out PCM2 fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket; switch on the ignition and the Porsche System Tester II 9588
- Select vehicle type, Boxster, and start the automatic control module search
- In the Control units menu, select PCM2
- Select External amplifier in the PCM2 menu and confirm with the ">>" key
- Make a selection in the Fault memory menu and start with the ">>" key
- Read out fault memory
- Erase fault memory
- Remove ignition key and switch on ignition again
- Read out fault memory again
- Extract ambient data, press the ">>" key
|
The fault is remedied
-> End |
Step 2 |
| 2 |
- Replace external BOSE amplifier
|
-> End |
- |