LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Heated Glass/Defoggers >> Glasses, Window Control >> Removing and installing power window motor >> Standardising the new power window motor

Standardising the new power window motor

  1. Switch ignition on.
  2. Open door window completely by continuously actuating the power window operating button, and then close window. Press power window button until the window is closed and is switched off by the blockage detection function of the power window motor. Standardisation is then completed.
  3. Perform a function test.
scientia non olet · About LEMON Manuals