Assembling Instrument Cluster
- Carefully assemble display unit and front frame. Engage fastening clips (new version).
- Before assembly, check that both green guide tabs on the electronic unit are pushed outwards.
- Assemble the electronic unit and display unit carefully and evenly (do not tilt). Engage fastening clip underneath in the center. Press the locking tab in the upper part of the electronic unit together and into the front frame holder.
- Press both green guide tabs inwards over the contact plugs with a screwdriver (do not tilt).
- Press the sheetmetal braces on the left and right over the fastening eyelets.
- Replace adjusting knob for clock and daily trip mileage display.