LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> DME 7.2 - 911 CARRERA & BOXSTER >> DTC P1118: Oxygen Sensor Heating After TWC, Bank 1 - Signal Implausible >> Diagnosis Procedure >> Check Resistance Of Oxygen Sensor Heating

Check Resistance Of Oxygen Sensor Heating

  1. Remove connector of oxygen sensor 2 after TWC.
  2. Connect ohmmeter to pin 1 and pin 2 of the oxygen sensor connector towards the oxygen sensor.

    Display: < 2.6 ohms at 25° C

scientia non olet · About LEMON Manuals