LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> DME 7.2 - 911 CARRERA & BOXSTER >> DTC P0445: EVAP Canister Purge Valve - Shirt To B+/Short To Ground >> Diagnosis Procedure >> Check Triggering Wire For EVAP Canister Purge Valve

Check Triggering Wire For EVAP Canister Purge Valve

  1. Remove connector of EVAP canister purge valve.
  2. Connect special tool 9637 to wiring harness (DME control module connector).
  3. Connect ohmmeter to EVAP canister purge valve, pin 2, and special tool 9637, pin III/3.

    Display: 0-5 ohms

scientia non olet · About LEMON Manuals