LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> DME 7.2 - 911 CARRERA & BOXSTER >> DTC P0343: Camshaft Position Sensor 1 - Above Limit >> Diagnosis Procedure >> Check power supply to CMP sensors

Check power supply to CMP sensors

  1. Remove connector of CMP sensor 1.
  2. Switch on the ignition.
  3. Connect voltmeter to pin 1 (negative) and pin 3 (positive).

    Display: approx. 5 V

scientia non olet · About LEMON Manuals