800B PCM2 - gateway: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING - 800B PCM2 - GATEWAY
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out PCM2 fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket, start it and switch on the ignition.
- Select Boxster in the Vehicle type menu and confirm with the ">>" key.
- Select PCM in the control modules selection and confirm with the ">>" key.
- Select PCM2/CDR23 in the control modules selection and confirm with the ">>" key.
- Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
- Click the ">>" key in the Fault memory menu.
- Read out fault memory.
- Erase fault memory.
- Remove ignition key and switch on ignition again.
- Read out fault memory.
- Extract ambient data, press the ">>" key.
|
-> End |
Step 2 |
| 2 |
Read out instrument cluster fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket; switch on the ignition and the Porsche System Tester II 9588.
- Select 986 as the vehicle type and start the automatic control module search.
- In the Control units menu, select Instrument cluster.
- Click the ">>" key in the Fault memory menu.
- Read out fault memory.
- Erase fault memory.
- Remove ignition key and switch on ignition again.
- Read out fault memory.
|
-> End |
Step 3 |
| 3 |
Elimination of faults |
Eliminate faults in accordance with the entry in the memory |
-> End |
Step 4 |
| 4 |
Replace PCM2 |
-> End |
- |