Electrical power supply - general: Remedy

Enter the current time again.

Input the radio code. If the code card is unavailable, the radio code can be read from the DME control module (under "Vehicle data"). This code is also available from the Porsche IPAS.

• Input the PCM code. If the code card is unavailable, the PCM code can also be read from the DME control module (under "Vehicle data"). This code is also available from the Porsche IPAS.
• Switch on the PCM with a free panoramic view for approx. 20 minutes (to load GPS almanac).
• The date and time are also adopted once the GPS almanac has been loaded; it may be necessary to change over to summer time (daylight-saving time). This time is transferred to the instrument cluster. If the time is then manually changed by means of the instrument cluster, this time is adopted by the PCM and synchronised with GPS time.
• The stored stations are displayed again when station buttons 1 to 6 are pressed.
• The telephone is enabled again when the telephone PIN  code is entered with the SIM  telephone card inserted.