Actual values

Values currently under test can be read out via this menu item.

The following values (setpoints in brackets) can be called up:

• Speed
• Current fuel consumption
• Phototransistor PCM (0-255)

  0 : Maximum brightness

  255 : Minimum brightness

• Date
• Time
• Dial, left [volume control] (up/down-counter)
• Dial, right [selection knob] (up/down-counter)

* The counter is set to zero after the start of diagnosis. The counter is incremented by one when the dial is turned clockwise and decremented by one when the dial is turned counter-clockwise.