Control unit function - gateway: Identification

The diagnosis software number and the part number for the PCM2 can be read out under this menu item.

1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
3. Select PCM in the control modules selection and confirm with the ">>" key.
4. Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
5. Select Identification  in the PCM2 GW function selection and confirm with the ">>" key.
6. Diagnosis software number; PCM2 part number.  appears on the display.
7. Confirm PCM2 GW extended identification with the "F8" key or the ">>" key.