Audio tests
The following functions can be run using this menu item:
- Manual single selection
- Automatic test
AUDIO TESTS MENU ITEM - FUNCTIONS
| Menu item |
Function |
|
|
A manual audio test can be carried out using this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
- Select PCM in the control modules selection and confirm with the ">>" key.
- Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
- Select the Audio tests menu item.
- Select Manual single selection
menu item.
- Select a particular system and confirm with the ">>" key.
The following selection is available:
- Front left, test frequency 1 kHz
- Front right, test frequency 1 kHz
- Door speaker left, test frequency 1 kHz
- Door speaker right, test frequency 1 kHz
- "F5" Boost volume
- "F6" Lower volume
- "F8" Start test
|
|
|
A manual audio test can be carried out using this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
- Select PCM in the control modules selection and confirm with the ">>" key.
- Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
- Select the Audio tests menu item and confirm with the ">>" key.
- Select the Automatic test menu item and confirm with the ">>" key.
The test sequence is automatic. |