Actual values

The unlock counter and supply voltage can be read out under the Actual values menu item.

ACTUAL VALUES MENU ITEM - FUNCTION (GATEWAY)

Menu item	Function
Unlock counter	The unlock counter can be read out during troubleshooting using this menu item. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key. Select PCM in the control modules selection and confirm with the ">>" key. Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key. Select Actual values in the PCM2 GW function selection and confirm with the ">>" key. Select Unlock counter in the PCM2 GW actual values function selection and confirm with the ">>" key. Read out values from the display field.
Supply voltage	The supply voltage can be read out during troubleshooting using this menu item. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key. Select PCM in the control modules selection and confirm with the ">>" key. Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key. Select Actual values in the PCM2 GW function selection and confirm with the ">>" key. Select Supply voltage in the PCM2 GW actual values function selection and confirm with the ">>" key. Read out values from the display field.

Menu item

Function

The unlock counter can be read out during troubleshooting using this menu item.

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
Select PCM in the control modules selection and confirm with the ">>" key.
Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
Select Actual values in the PCM2 GW function selection and confirm with the ">>" key.
Select Unlock counter in the PCM2 GW actual values function selection and confirm with the ">>" key.
Read out values from the display field.

The supply voltage can be read out during troubleshooting using this menu item.

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
Select PCM in the control modules selection and confirm with the ">>" key.
Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
Select Actual values in the PCM2 GW function selection and confirm with the ">>" key.
Select Supply voltage in the PCM2 GW actual values function selection and confirm with the ">>" key.
Read out values from the display field.