Extended identification

Additional data present in the control unit can be read out using this menu item.

1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key.
3. Select PCM in the control modules selection and confirm with the ">>" key.
4. Select External BOSE amplifier in the PCM2 function selection and confirm with the ">>" key.
5. Select the Identification  menu item and press the ">>" key
6. Diagnosis software number; PCM2 part number.  appears on the display.
7. Confirm PCM2 GW extended identification with the "F8" key or the ">>" key.

The following data can be read out: 

• Data record code
• Diagnosis software number
• Hardware version
• Porsche Part No.
• Serial No.
• Software version
• BOSE software version
• Workshop or tester ID