MOST actual and required installed components lists

All MOST control modules that are connected to the PCM2 are entered via diagnostic tester in the required installed components list. Only the MOST control units recorded in the MOST required installed components list are activated. An actual installed components list of detected devices is written and saved when the PCM2 is started.

COMPONENT LIST MENU ITEM - FUNCTION (CDR23 CONTROL MODULE)

Menu item	Function
MOST actual installed components list	Under this menu item, the components identified by the system as operational and entered in the MOST actual installed components list can be displayed. Connect and start the Porsche System Tester II 9588 and switch on the ignition Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key Select PCM in the Control units selection menu and confirm with the ">>" key Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key Select MOST actual installed components list in the CDR23 function selection menu and start it with the ">>" key The components identified by the system are listed (depending on the equipment)
MOST required installed components list	You can code the MOST required installed components list via diagnostic tester using this menu item. Connect and start the Porsche System Tester II 9588 and switch on the ignition Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key Select PCM in the Control units selection menu and confirm with the ">>" key Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key Select MOST required installed components list in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key Select Components from selection list corresponding to vehicle equipment in the CDR23 MOST required installed components list menu and code with the "F8" key

Menu item

Function

MOST actual installed components list

Under this menu item, the components identified by the system as operational and entered in the MOST actual installed components list can be displayed.

Connect and start the Porsche System Tester II 9588 and switch on the ignition
Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
Select PCM in the Control units selection menu and confirm with the ">>" key
Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
Select MOST actual installed components list in the CDR23 function selection menu and start it with the ">>" key
The components identified by the system are listed (depending on the equipment)

MOST required installed components list

You can code the MOST required installed components list via diagnostic tester using this menu item.

Connect and start the Porsche System Tester II 9588 and switch on the ignition
Select Boxster (986) in the Vehicle type menu and confirm with the ">>" key
Select PCM in the Control units selection menu and confirm with the ">>" key
Select CDR23 in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
Select MOST required installed components list in the Boxster (986) CDR23 function selection menu and confirm with the ">>" key
Select Components from selection list corresponding to vehicle equipment in the CDR23 MOST required installed components list menu and code with the "F8" key