LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1994 >> 911 Speedster, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Lower Control Arm & Hub Assembly >> Reassembly & Installation

Reassembly & Installation

Heat control arm to 248-302°F (120-150°C). Press wheel bearing assembly into control arm. Install retaining plates. Press hub into wheel bearing assembly. To complete installation, reverse removal procedure. Tighten nuts and bolts to specification. See TORQUE SPECIFICATIONS.

scientia non olet · About LEMON Manuals