LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1989 >> 944 Base, Standard >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the 944 Turbo, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All (Both Axles)1.8B
Front,Disc Brakes1.0B
Rear,Disc Brakes1.0B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed Brake System.
Each Additional0.2B
w/ABS,One0.7B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed Brake System.
Single Piston,One0.5B
w/ABS,Dual Piston,One0.8B
w/ABS,Four Piston,One1.0B
w/o ABS,Dual Piston,One0.7B
w/o ABS,Four Piston,One0.9B
Combination Procedure: CALIPER: Replace:
Includes: Bleed Brake System.
w/ABS,One0.4B
Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace:
Includes: Repack Wheel Bearings.0.8B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
Front,EachIncludes: Repack Wheel Bearings.0.3B
Rear,EachIncludes: Repack Wheel Bearings.0.1B
Combination Procedure: WHEEL BEARING: Repack:
Front,Both Sides0.8B
Combination Procedure: WHEEL BEARING: Replace:
Front,One Side0.4B