Clutch Pressure Plate: Remove & Replace

WARNING: This page is about the 944 Base, Automatic, which is a different variant/trim than selected.

DOES NOT include resurface Flywheel.

Applies To	Standard Hours	Skill Level
Normally Aspirated	9.2	C
Combination Procedure: CLUTCH PILOT BEARING: Replace:
	0.2	C
Combination Procedure: CLUTCH RELEASE BEARING: Replace:
	0.1	C
Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace:
	0.2	C
Combination Procedure: FLYWHEEL: Resurface:
	0.8	B
Combination Procedure: FLYWHEEL RING GEAR: Replace:
	0.3	C