LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Rear Suspension Assembly >> Removal

Rear Suspension Assembly: Removal

  1. Raise and support vehicle. Detach axle shaft from differential by removing Allen head bolts. Detach brake caliper from rotor.
  2. Remove countersunk screws and take off rotor. Remove parking brake shoes and spreader lever. Pull parking brake cable out of guide in hub assembly.
  3. Remove hub assembly with upper control arm attached after removing control arm retaining bolt. Remove lower control arm retaining nuts and bolts. Remove control arm from vehicle. Remove stabilizer bar and link (if necessary).
scientia non olet · About LEMON Manuals