LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Wheel Bearing >> Removal

Wheel Bearing: Removal

  1. Raise and support vehicle. Remove wheel assembly. Remove grease cap, loosen pinch bolt, and remove hub nut. Remove thrust washer and outer wheel bearing.
  2. Remove brake caliper and support out of the way. Remove hub and rotor assembly. Pry out inner grease seal and remove inner bearing.
  3. Remove hub-to-rotor retaining bolts and separate hub from rotor. Heat wheel hub to 250-300°F (120-150°C) and press out inner and outer bearing races.
scientia non olet · About LEMON Manuals