LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Fuel Pump - Electric >> Removal & Installation (Except AUDI 5000S) >> Removal

Removal & Installation (Except AUDI 5000S): Removal

  1. Fuel pressure must be relieved prior to any component removal. Carefully remove and plug fuel lines to prevent spillage. Disconnect electrical connections.
    NOTE: Do not allow smoking, open flame or sparks in area while servicing fuel system components. Disconnect battery ground terminal prior to removing pump.
  2. Remove mounting bolts and retain rubber insulating grommets for reinstallation. Rotate fuel pump as required to clear chassis and remove from vehicle.
scientia non olet · About LEMON Manuals