LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 5.0L V8 >> Camshafts, Camshaft Housings & Drive Belt >> Camshafts Drive Belt >> Adjusting

Camshafts Drive Belt: Adjusting

The drive belt adjusting screw is located on bottom of engine at front right side. Loosen lock nut of adjusting screw and turn adjusting screw until correct drive belt tension is reached.

CAUTION: Never turn engine counterclockwise, because drive belt could jump off when there is insufficient tension.
CAMSHAFT DRIVE BELT TENSION

Application Scale Value
New or used 4.5
scientia non olet · About LEMON Manuals