LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster >> Removal & Installation (928S)

Removal & Installation (928S)

  1. Disconnect battery ground. Remove steering wheel. Remove column switch, cover screws, rear wiper switch and defroster switch. Disconnect both 12-pin plugs at cluster.
  2. Remove bolt and screw beneath cluster. Lift and tilt cluster toward rear. Remove mounting bolt on right side, and remove cluster. To install, reverse removal procedure.