LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Power Brake Unit >> Removal

Power Brake Unit: Removal

  1. With master cylinder removed, disconnect vacuum hose from power brake unit. On 944 models, remove oil dip stick.
  2. Remove pin connecting power brake unit operating rod to brake pedal assembly, remove attaching nuts and remove power brake unit from vehicle.
scientia non olet · About LEMON Manuals