LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Front Disc Brake Pads >> Installation (All Models)

Installation (All Models)

  1. Push piston back into caliper using Caliper Tool (P83) or wooden block. Remove anti-rotation locks (if equipped) and clean all parts with alcohol.
  2. Inspect all parts for damage or wear. Ensure piston 20 degrees position is correct using Gauge (P84). Install remaining parts in reverse order of removal, replacing parts as necessary. See Figure .
scientia non olet · About LEMON Manuals