LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Overhaul >> Brake Caliper >> Separating Caliper Halves

Separating Caliper Halves

  1. Caliper halves should only be separated if "O" ring seals between caliper halves show signs of leakage.
  2. To separate, remove bolts attaching caliper halves, separate caliper and discard "O" ring seals.
NOTE: Install shorter bolts in outside holes. Tighten 2 inside bolts first, then tighten outside bolts. Bolts must be tightened in 2 stages. First to 50 percent of torque value and finally to 100 percent of torque value.
scientia non olet · About LEMON Manuals