LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1986 >> 928 Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Overhaul >> Brake Caliper >> Disassembly (Except 911 Models)

Disassembly (Except 911 Models)

  1. With disc pads removed, press caliper frame off mounting frame. Insert wooden block in caliper frame and force cylinder assembly off caliper frame with plastic hammer.
  2. Remove dust boot retaining ring and dust boot. Force piston out of caliper bore with light air pressure. Remove piston seal from cylinder groove without damaging groove or bore.
scientia non olet · About LEMON Manuals