LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1985 >> 944 Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - A/T - AUDI 087, 087E, 089 >> Service (In Vehicle) >> Valve Body >> Disassembly

Valve Body: Disassembly

  1. Remove transfer plate-to-main valve body attaching screws. Lift transfer plate and separator plate from main valve body. Remove main valve body check balls from passages in valve body.
    NOTE: DO NOT alter settings of adjusting screws. Adjusting screws change pressures and can only be properly adjusted on test stand.
  2. Remove rear end cover plate and withdraw valves, springs and adjusting screws. Remove remaining end plates one at a time and withdraw all valves, plugs, springs and adjusting screws. Tag all parts for reassembly reference or use tray (2008) to hold parts. This tray holds springs and valves in correct order and location.
scientia non olet · About LEMON Manuals