Testing Procedure
Engine must be at normal operating temperature. Connect tachometer. Start engine and set parking and service brakes. Place selector in "D". Depress accelerator briefly to full throttle and note maximum RPM obtained. Engine speed should be within limits. See STALL SPEED SPECIFICATIONS table.
STALL SPEED SPECIFICATIONS
| Application | (1) Stall RPM | |||
|---|---|---|---|---|
| Coupe GT, 4000S & 4000S Quattro | ||||
| 087 | 2250-2500 | |||
| 089 | 2450-2700 | |||
| 089 E-Mode | 2530-2780 | |||
| 5000S | ||||
| 087 | 2250-2500 | |||
| 087 (Turbo) | 3000-3400 | |||
| 087 E-Mode | 2400 | |||
| 944 | ||||
| 087 | 2600-3000 | |||
| Quantum | ||||
| 087 | 2250-2500 | |||
| 089 | 2450-2700 | |||
| 089 E-Mode | 2530-2780 | |||
|
||||