Strut Assembly: Installation

To install, reverse removal procedure.

Fig 1: Disassembled View Of 928 Strut Assembly

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

TIGHTENING SPECIFICATIONS

Application	Ft. Lbs. (N.m)
Caliper-to-Hub Bolt	61 (83)
Hub-to-Stub Axle	333 (451)
Lower Control Arm-to-Hub	101 (137)
Lower Control Arm-to-Link Pin	61 (83)
Shock Absorber-to-Upper Strut Mount	42 (57)
Stabilizer Bar-to-Body	33 (45)
Stabilizer Bar-to-Link	33 (45)
Stabilizer Link-to-Control Arm	33 (45)
Upper Control Arm-to-Crossmember	33 (45)
Upper Control Arm-to-Hub	33 (45)
Upper Strut Mount-to-Body Locknuts	33 (45)