911 & 912 Rear (1965-72)
Loosen retaining bolt nuts and eccentric bolt nuts at the rear axle flange. Turn toe eccentric so that specifications are within limits. If in cases requiring extreme adjustment the camber eccentric is in the extreme left or right of the oblong cavity in the radius arm then the camber eccentric should be turned around by 180° to preclude possible binding.
NOTE:
The camber eccentric must always point down at the time of installation to preclude binding when toe-in adjustments are made.
Tighten retaining bolt nuts and eccentric bolt nuts. Recheck rear wheel camber and toe.