LEMON Manuals
: Even more car manuals for everyone
Home
>>
Pontiac
>>
2010
>>
Solstice Base, 2D Convertible, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 8 (Engine Controls And Fuel - 2.0L - DTC P000A To DTC P0238)
>>
DTC P0130-P0133, P2195, P2196, or P2297
>>
Conditions for Running the DTC
>>
P0131 Lean Test Enable
P0131 Lean Test Enable
WARNING:
This page is about a different variant/trim than selected.
The Ignition 1 Signal parameter is between 11-18 volts.
DTC P0131 runs the lean test continuously when the above conditions are met.