Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

Before the ECM can report DTC P0016 or P0017 failed, DTCs P0010, P0013, P0335, P0336, P0338, P0341, P0342, P0343, P0366, P0367, P0368, P2088, P2089, P2090, and P2091 must run and pass.
The engine is operating for greater than 50 s.
The engine coolant temperature is between 0-95°C (32-203°F).
The calculated engine oil temperature is less than 120°C (248°F).
The DTCs run continuously when the above conditions are met for approximately 10 minutes.