LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls And Fuel - 2.0L - DTC P000A To DTC P0238) >> DTC P000A, P000B, P0011, or P0014 >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Ignition OFF, disconnect the harness connector at the appropriate camshaft position (CMP) actuator solenoid.
  2. Test for 7-12 Ω between the control terminal B and the ignition terminal A of the CMP actuator solenoid.
    • If not within the specified range, replace the CMP actuator solenoid.
  3. Test for infinite resistance between each terminal and the CMP actuator solenoid housing.
    • If less than the specified value, replace the CMP actuator solenoid valve.